X-Light V3 Spinning disk confocal
X-Light V3 is the next generation of spinning disk. It relies on the cutting-edge technology, advanced optical design and engineering solutions developed by CrestOptics to meet the very high-end specifications required by modern fluorescence microscopy applications.
HeLa cells stained with DAPI for DNA (blue), tubulin (green), mitochondria (orange), nucleoli (red). The traditional Spinning Disk (SD) confocal FOV (18
mm) is shown (white dotted box) compared with the large (25 mm) X-Light V3 FOV (yellow box). 60x Oil, NA 1.42.
Uniform illumination over the entire FOV
A microlens array built into the illuminator gives the X-Light V3 even illumination across the full 25mm FOV, essential for accurate quantitative imaging and clean stitching of large samples.
3D movie of AD-MSCs TRAIL cells (GFP-green) actively migrating inside the VITVO bioreactor matrix (by Rigenerand) and surrounding A673 tumor cells (drRED -red), till to form apoptotic bodies before death. A total Z volume of 450 um was acquired. 4x Air, NA 0.2.
Highest spinning disk rotation for fast imaging
With the fastest disk rotation on the market (15,000 rpm) and built-in camera synchronisation, the X-Light V3 achieves acquisition speeds of over 1000 fps.
Large image of a mouse brain section marked with different RNA species; nuclei are stained in blue.
Upgradable to Super-Resolution on the same set-up
Adding DeepSIM upgrades the X-Light V3 to super-resolution, taking researchers seamlessly from widefield to confocal to super-resolution on the same setup.
Ultra-large field of view (FOV) up to 25 mm
The first confocal system with a 25mm FOV on single and dual cameras, capturing more data (or a full organism) in a single frame and cutting the number of tiles needed for large specimens.
Mouse kidney tissue section imaging: a comparison between the traditional illuminator (left), which introduces vignetting artifacts, and the
X-Light V3 Micro-lenses illuminator (right), providing accurate, artifact-free data without the need for post-processing corrections.
Revolutionise your imaging
Ready for a second camera, the X-Light V3 can host two matching cameras for fast simultaneous dual-colour imaging, or two different cameras for different applications, all while keeping the full 25mm FOV.
Live acquisition of LLC-PK1 cells expressing EB3-mEmerald (green) and H2B-mCherry (red). A mitotic division is shown. 63x Oil, NA 1.4. Sample credits: 89 North distributor.
Broad Fluorophores Choice
A wide excitation range of 405-750 nm gives maximum flexibility in fluorophore choice, supporting applications like spatial transcriptomics and multiplexed imaging across multiple cellular markers.
Hippocampal coronal slice from Thyl-GFP mouse brain shown in three modes of use (Widefield – WF, Spinning disk confocal – CF, Super-resolution – SR). 20x Air, NA 0.75.
Specifications
| X-Light V3 Technical Features | |
| Imaging modalities | Widefield/Confocal/Super-resolution in combination with DeepSIM X-Light |
| Compatible microscopes | All research-grade upright and inverted microscopes: Nexcope, Zaber, Nikon, Zeiss, Evident, Leica |
| FOV | Up to 25 mm diagonal |
| Laser | Multi mode lasers with SMA coupling |
| Spectral range | Excitation 400-750 nm/ Emission 400-850 nm |
| Camera | Compatible with CCD/EMCCD cameras and sCMOS cameras Dual-camera view: simoultaneous dual-camera imaging up to 25 mm |
| Disk speed/scan rate | 15000 RPM / > 1000 fps |
| Spinning disk geometry (diameter/spacing) | 50/250 µm pinholes for routine imaging 50/400 µm pinholes with wider spacing for deep imaging Slit spirals for high-throughput applications Customized disk available upon request |
| Resolution | Lateral Resolution (FWHM): ~230 nm (High NA 1,4) Axial Resolution (FWHM): ~600 nm (High NA 1,4) |
| Filter wheels | Motorized filter wheels and slider: 4-positions excitation filter wheel, 3-positions dichroic filter wheel, 8-positions emission filter wheel, 3 positions slider for dual camera use |
| Software | NIS Elements /µManager / MetaMorph/ Volocity / VisiView®/ ZEN/ Inscoper/ Starlyte |
| Recommended installation conditions | Temperature 23± 5°C, Humidity 70% RH or less (no condensation) |
| Weight | 26,0 Kg (57 lbs) |
| Dimensions | X-Light V3: 370 (w) x 555.6 (l) x 226.5 (h) mm 14.5 (w) x 21.9 (l) x 8.9 (h) inches X-Light V3 + DeepSIM X-Light: 370 (w) x 936.5 (l) x 290.5 (h) mm 14.5 (w) x 36.8 (l) x 11.4 (h) inches |